Schecter HELLRAISER C VI

Complete Product Specification About Schecter HELLRAISER C VI

Tuned one octave below standard tuning, the Schecter 184-SHC HELLRAISER C-VI Electric Guitar is an improvement over the 6-string bass of the early '60s.

This model features a set neck for added sustain and durability. The C-VI is the perfect instrument for guitarists who want to add depth to their sonic arsenal. With its 30" scale, it can be strummed like a guitar or plucked like a bass. EMG Active 81/89R Pickups with coil-tapping and 3-way switch are on board to offer a wide variety of humbucker and single-coil type tones.The contoured mahogany body is topped with a fine layer of Quilted maple for added beauty and tone. A TonePros bridge and Schecter locking tuners permit perfect intonation and accurate tuning.

Schecter Locking Tuners
Schecter Locking Tuners feature a locking screw pin to lock the string into place for greater tuning stability. Details include a 19:1 gear ratio allowing for precise fine tuning adjustments, removable knobs, threaded peghead bushing, and a 10mm diameter peg hole.

Rosewood Finger Board
The most common fretboard, Rosewood is naturally oily, and works well for any surface that sees frequent human contact. The sound is richer in fundamental than Maple because the stray overtones are absorbed into the oily pores.

EMG Active 81tw/89R Pickups
Bridge: The 81TW dual-mode design allows for maximum flexibility, with the original 81 providing all the crunch and aggressiveness it's famous for and an all new single-coil that features a fatter tone with plenty of punch and clarity. Neck: The EMG 89 is loaded with alnico V magnets and has separate preamps each providing custom outputs for both dual coil and single coil modes (R Version use REAR coil ). In dual coil mode, the sound is rich, warm and powerful, but still very clear and is similar.

3-pc Mahogany w/Carbon Fiber Rods Neck
Made with 3 pieces of mahogany for extra stability. Where standard necks may show aging defects throughout the years, the 3 piece neck will remain straight for a lifetime of playability. Two Carbon Fiber Rods are installed next to the Truss Rod for extra stability. Stronger than an equivalent volume of steel, Carbon Fiber can supplement an adjustable truss rod to help prevent neck twisting. Carbon Fiber adds little weight, but adds significant stiffness.

 

SPECS

General

Model Name
Hellraiser C-VI
Item Number
184
Country of Origin
South Korea
Guitar Color Shown
Black Cherry (BCH)

Neck

Tuners
Schecter Locking
Fretboard
Rosewood
Neck Material
Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods
Inlays
Abalone Gothic Crosses
Scale
30” (762mm)
Neck Shape
Thin ‘C’
Thickness
@ 1st Fret- .787” (20mm)/ @ 12th Fret- .866” (22mm)
Frets
24 X-Jumbo
Fretboard Radius
14” (355mm)
Nut
Graph Tech XL Black Tusq
Nut Width
1.653” (42mm)
Truss Rod
2-Way Adjustable Rod w/ 5/32” (4mm) Allen Nut

Body

Guitar Colors
Black Cherry (BCH)
Hardware Color
Black Chrome
Top Contour
Arched Top
Dexterity
Right Handed
Construction
Set-Neck w/Ultra Access
Body Material
Mahogany
Top Material
Quilted Maple
Binding
Abalone w/ BLK/WHT/BLK Multi-ply
Bridge
TonePros System w/Custom Brass Saddles

Electronics

Controls
Volume (Push-Pull)/Volume (Push-Pull)/Tone/3-Way Switch
Bridge Pickup
EMG 81TW
Neck Pickup
EMG 89R
Battery Compartment
9-volt Clip-in Battery Compartment

Accessories

Knobs
Metal Knurled w/ Set Screw
Strings
Ernie Ball Hellcat VI Custom Strings (90-75-56-44-34-24)
Case
SGR-UNIVERSAL BASS "Case Sold Separately"
Read more
1 review Write a Review
SKU:
184_IS
UPC:
'81544701721
Availability:
Ships within 3-5 Days
Ships within 3-5 Days

In Stock

$1,717.21
Adding to cart… The item has been added

Product Reviews

Unbiased Impressions From Unboxing to Performance

  • 5

    Theuseruser 5th Dec 2020

    Hellraiser Baritone

    A very flexible instrument. Can be strung as a bass or as a guitar. The pickups are very flexible too; being able to get a good heavy tones and good clean times. The build quality, tuners, finish, binding, and locking bridge are utterly superb.

Tuned one octave below standard tuning, the Schecter 184-SHC HELLRAISER C-VI Electric Guitar is an improvement over the 6-string bass of the early '60s.

This model features a set neck for added sustain and durability. The C-VI is the perfect instrument for guitarists who want to add depth to their sonic arsenal. With its 30" scale, it can be strummed like a guitar or plucked like a bass. EMG Active 81/89R Pickups with coil-tapping and 3-way switch are on board to offer a wide variety of humbucker and single-coil type tones.The contoured mahogany body is topped with a fine layer of Quilted maple for added beauty and tone. A TonePros bridge and Schecter locking tuners permit perfect intonation and accurate tuning.

Schecter Locking Tuners
Schecter Locking Tuners feature a locking screw pin to lock the string into place for greater tuning stability. Details include a 19:1 gear ratio allowing for precise fine tuning adjustments, removable knobs, threaded peghead bushing, and a 10mm diameter peg hole.

Rosewood Finger Board
The most common fretboard, Rosewood is naturally oily, and works well for any surface that sees frequent human contact. The sound is richer in fundamental than Maple because the stray overtones are absorbed into the oily pores.

EMG Active 81tw/89R Pickups
Bridge: The 81TW dual-mode design allows for maximum flexibility, with the original 81 providing all the crunch and aggressiveness it's famous for and an all new single-coil that features a fatter tone with plenty of punch and clarity. Neck: The EMG 89 is loaded with alnico V magnets and has separate preamps each providing custom outputs for both dual coil and single coil modes (R Version use REAR coil ). In dual coil mode, the sound is rich, warm and powerful, but still very clear and is similar.

3-pc Mahogany w/Carbon Fiber Rods Neck
Made with 3 pieces of mahogany for extra stability. Where standard necks may show aging defects throughout the years, the 3 piece neck will remain straight for a lifetime of playability. Two Carbon Fiber Rods are installed next to the Truss Rod for extra stability. Stronger than an equivalent volume of steel, Carbon Fiber can supplement an adjustable truss rod to help prevent neck twisting. Carbon Fiber adds little weight, but adds significant stiffness.

 

SPECS

General

Model Name
Hellraiser C-VI
Item Number
184
Country of Origin
South Korea
Guitar Color Shown
Black Cherry (BCH)

Neck

Tuners
Schecter Locking
Fretboard
Rosewood
Neck Material
Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods
Inlays
Abalone Gothic Crosses
Scale
30” (762mm)
Neck Shape
Thin ‘C’
Thickness
@ 1st Fret- .787” (20mm)/ @ 12th Fret- .866” (22mm)
Frets
24 X-Jumbo
Fretboard Radius
14” (355mm)
Nut
Graph Tech XL Black Tusq
Nut Width
1.653” (42mm)
Truss Rod
2-Way Adjustable Rod w/ 5/32” (4mm) Allen Nut

Body

Guitar Colors
Black Cherry (BCH)
Hardware Color
Black Chrome
Top Contour
Arched Top
Dexterity
Right Handed
Construction
Set-Neck w/Ultra Access
Body Material
Mahogany
Top Material
Quilted Maple
Binding
Abalone w/ BLK/WHT/BLK Multi-ply
Bridge
TonePros System w/Custom Brass Saddles

Electronics

Controls
Volume (Push-Pull)/Volume (Push-Pull)/Tone/3-Way Switch
Bridge Pickup
EMG 81TW
Neck Pickup
EMG 89R
Battery Compartment
9-volt Clip-in Battery Compartment

Accessories

Knobs
Metal Knurled w/ Set Screw
Strings
Ernie Ball Hellcat VI Custom Strings (90-75-56-44-34-24)
Case
SGR-UNIVERSAL BASS "Case Sold Separately"
1 Year

Related Products

Explore The Products With Same Categories